With our
Cupolas:
If you are mounting a weathervane with one of
our cupolas you do not need any mounting hardware. Our
cupolas come drilled and braced to accept a weathervane.
With an Existing
Cupola:
If you are mounting one
of our weathervanes in an existing cupola, it should be
prepared in the following manner:
Drill a 3/4" hole in the center of the cupola
roof.
Secure a brace inside the cupola and drill a
3/4" hole in the center of that board.
Note: If
you cannot access the inside of the cupola to secure a
brace, you will need to use a
roof mount.
Without a Cupola:
If you are installing a weathervane
without a cupola you will need to use some sort of mount. Roof mounts and side mounts for all weathervanes are
located on our Mounts and Accessories page.
The pictures below show a few of the standard roof mounts
for installing weathervanes.
