|
Finial
Installation with Square Cap:
Step 1:
Measure the roof pitch.
Step 2:
Trace the measured
angle onto 2 parrallel sides of the square cap.
(back and front)
Step 3:
Install the Adjustable
Roof Mount onto the roof in the desired location of the
Finial.
Adjustable Roof Mount
Step 4:
Insert the 3/4" black
rod into the mount and tighten the 2 set screws firmly.
Step 5:
Apply silicone caulking/liquid
nails
inside the finial tube. This will seal the finial to the
black rod.
Step 6:
Slide the finial and
cap into place down over the black rod. |
